EOS sensing module
Hardware design connects sensing inputs, the analog front end, controller and power. USB connectivity supports development and inspection.
PRODUCT / EOS
Electrostatic monitoring.
Made for mobile equipment.
EOS combines a sensing module with data software, designed to record field changes and relate them to equipment routes.
One system.
Two components.
The instrument and its data are designed together.
EOS data software
A baseline for device-data collection and history storage has been developed. Physical sensor integration and route analysis are the next validation scope.
A straightforward workflow.
- 01
Check mounting
Review cart structure, movement and grounding.
- 02
Establish baseline
Compare with a reference instrument and record the conditions.
- 03
Record on route
Integrate acquisition of readings and device health.
- 04
Review history
Review recurring changes and missing intervals.
This is the intended workflow. Physical integration and field suitability remain to be validated.
What we can specify today.
| Item | Detail | Status |
|---|---|---|
| AFE | ADA4530-based circuit | Circuit simulation |
| Controller | ESP32-S3 / ESP-IDF | Firmware baseline |
| Data | HTTP API · history | Software baseline |
| Distance / accuracy | To be specified with target, environment and calibration | Not measured |
| Field transfer | Subject to on-site wireless policy | Offline logging under review |
| Active neutralization | Excluded from initial measurement validation | Separate safety review |